上海郜盟专业CE认证为您解读

工业缝纫机缝纫设备欧盟CE认证

1、工业缝纫机缝纫设备欧盟CE认证指令

MD机械指令：2006/42/EC

2、工业缝纫机缝纫设备欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN ISO 10821:2005 Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) 工业缝纫机缝纫设备、装置和系统的安全要求（ISO 10821-2005）

3、EN ISO 10821:2005适用范围：

This International Standard identifies hazards and specifies safety requirements applicable to sewing machines, sewing units and sewing systems designed for professional (industrial, commercial or laboratory) use in industries including the clothing and footwear, leather goods, shirts and blousery, hosiery and knitwear, lingerie, glove, upholstery and packaging industries, and in shoe repair. The information on use and maintenance of such machines in other industries could give rise to hazards not considered in this International Standard. The requirements of this International Standard are applicable to machinery installed in dry and well-kept, clean locations and processing dry sewing material. Where the sewing machines, sewing units or sewing systems are used in other than dry and well-kept, clean locations, more stringent measures could be necessary: for example, the higher degree of protection provided by enclosures (IP code — see IEC 60529) [5]. The purpose of this International Standard is to assist the manufacturer to design machinery such that the risks arising from its defined, intended use and maintenance are reduced or eliminated. The significant hazards and hazardous situations are given together with a reference to the corresponding safety requirement or measure in 4.2 to 4.8. Significant hazards are those identified and estimated as requiring action to reduce the risk they pose. This International Standard is not applicable to stepping frame sewing machines, shoe bottom stitching machines, large shuttle embroidery machines in accordance with ISO 11111 [1], integrated sewing systems within in the scope of ISO 11161 [2] or household sewing machines in accordance with IEC 60335-2-28 [4]. NOTE If household sewing machines are used for professional purposes, it could be necessary to take measures in accordance with this International Standard (e.g., the use of a finger deflecting device).上海郜盟提醒您，本国际标准确定了危险，并规定了适用于缝纫机、缝纫装置和缝纫系统的安全要求，这些缝纫设备设计用于服装和鞋类、皮革制品、衬衫和衬衫、袜子和针织品、内衣、手套、室内装潢和包装行业以及鞋类维修行业的专业（工业、商业或实验室）。在其他行业使用和维护此类机器的信息可能会导致本国际标准中未考虑的危险。本国际标准的要求适用于安装在干燥、保存良好、清洁位置并加工干式缝纫材料的机器。如果缝纫机、缝纫装置或缝纫系统使用在干燥且保存良好的清洁场所以外的地方，则可能需要采取更严格的措施：例如，外壳提供更高程度的保护（IP代码-见IEC 60529）[5]。本国际标准的目的是帮助制造商设计机械，以减少或消除因其定义、预期用途和维护而产生的风险。重大危险和危险情况与4.2至4.8中相应安全要求或措施的参考一起给出。重大危险是指需要采取措施降低其风险的已识别和估计的危险。本国际标准不适用于符合ISO 11111[1]的步进式缝纫机、鞋底缝纫、大型梭织刺绣机、ISO 11161[2]范围内的集成缝纫系统或符合IEC 60335-2-28[4]的家用缝纫。注：如果家用缝纫机用于专业用途，可能需要根据本国际标准采取措施（例如，使用手指偏转装置）。

展开全文

4、EN ISO 10821:2005 欧盟CE认证测试、检查项目

上海郜盟，专业CE认证技术服务公司，致力于中国制造全球化服务！提供权威CE认证机构-欧盟公告号机构机械设备CE认证服务，高效可靠！

未经允许不得转载！